With a cured volume shrinkage below 1.5% (ASTM D2566), this resin minimizes internal coating stresses that could lead to cracking or warping. It is ideally suited for high-precision MDF embossed primers and microelectronic metal encapsulations, ensuring the precise replication of intricate textures.
After curing, the film exhibits a Shore A hardness of ≤50, making it as pliable as an elastomer. This elasticity allows the coating to accommodate thermal expansion and contraction of MDF or metal bending, mitigating interface delamination and extending service life.
Modified with hydrophobic groups, the coating achieves a water absorption rate of less than 0.5% (GB/T 1733) and remains free from whitening or blistering even after 240 hours of immersion, protecting substrates from moisture-induced corrosion.
Demonstrating a 5B rating on melamine coatings (ASTM D3359) and flawless adhesion (0 rating) on aluminum and steel via cross-hatch testing, achieving "molecular-level interlocking" without sanding or additional primers.
| Resin type | Special Modified Acrylic Resin 1200A |
| Appearance | Transparent viscous liquid |
| Viscosity (mPa.s) | 18000~30000 (25℃) |
| Functionality | 1 |
| Chrominance (Pt-Co) | ≤80 |
| Acid value (mgKOH/g) | 60~100 |
Adhesion enhancement of density board (MDF) primer, resin layer, and metal substrates.
| Packaging | 20 / 220 (kg) |
| Warranty Period | 180 days |
| Storage Guidelines | This product should be stored and transported in dark opaque steel drums or containers containing corrosion-resistant and solvent-resistant coatings. Leave at least 15% space inside the container filled with air. Packaging should be stored in a cool environment below 35 ℃, and exposure to sunlight is strictly prohibited. |
Resin 1200A is primarily used to enhance adhesion in density board (MDF) primers, melamine resin coatings, and metal substrate pretreatment coatings (such as aluminum and steel).
The cured volume shrinkage is below 1.5% (tested via ASTM D2566), which minimizes internal stress and prevents surface cracking or warping.
Modified with hydrophobic groups, it achieves a water absorption rate under 0.5% (GB/T 1733) and shows no whitening or blistering even after 240 hours of water immersion.
It achieves a 5B adhesion rating on melamine resin coatings (ASTM D3359) and a flawless 0 rating on aluminum and steel metal substrates via cross-hatch testing without sanding.
The product has a warranty period of 180 days. It should be stored in dark, opaque steel drums below 35 ℃ with at least 15% air space remaining inside, kept completely away from direct sunlight.